Filter
Top Products
9
8. Clearing Blockages
WARNING: To reduce the risk of injury from moving
parts, unplug before servicing.
1. Unwrap the hose from the caddy. Remove any
obstruction (Fig.8/1).
2. Remove the dirt container and check the dirt container
inlet located on the cleaner (Fig.8/2).
3. Remove the nozzle guard by removing the three (3)
screws. Remove any obstructions (Fig.8/3).
Clearing Blockages
Clearing Blockages from the
TurboTool™ (V-041 only)
1. Rotate the locking ring 180º and turn the TurboTool™ over
(Fig.8/4).
2. Lift the cover off the TurboTool™ and remove blockage
(Fig.8/5).
3. To re-assemble, ensure that the tabs are engaged
(Fig.8/6). Pivot the lower housing closed and rotate
the locking ring 180º to secure (Fig.8/6).
Fig.8/1
Fig.8/2
Fig.8/3
Fig.8/4
Fig.8/5
Fig.8/6
Vax V-041/2 9th.qxd 2/23/05 12:34 PM Page 9