Filter
Top Products
Use & Function/How to Operate
5
8. Slide the dusting brush on to the post on the
lower caddy, with its bristles facing out (Fig.3/8A).
Slide the extension tube/crevice tool in to the
round slot on the front right side of tool caddy
(Fig.3/8B).
9. Align the tab on the dirt container lid with the slot
on dirt container. Push the lid down until it snaps
into place (Fig.3/9).
10. Set the aligning tab on the bottom of the dirt
container into the rectangular slot on the vacuum
cleaner (Fig.3/10A) and push until the container
clicks into place (Fig.3/10B).
4. How to Operate
Cord Release
Turn the quick cord release for easy cord removal.
Insert the cord into the cord clip (Fig.1/1 item 14); this
will keep the cord out of the way while vacuuming
(Fig.4/1).
Carpet Height Adjuster
Turn the carpet height adjuster according to the
surface being cleaned (Fig.4/2).
IMPORTANT: For easier adjustment, place cleaner
in upright position.
Fig.3/8
Fig.4/1
Fig.4/2
Fig.3/9
Fig.3/10
A
B
A
B
CAUTION: The brushbar continues to rotate
while the hose is removed or in use, and at all
times while the vacuum cleaner is on. Keep hair,
loose clothing, fingers and all parts of the body
away from the brush area while the vacuum
cleaner is on. The vacuum cleaner must be in
the upright position to lift the rotating brushbar
off the carpet when using the accessories. Vax
recommend that the carpet height adjuster is at
its highest setting.
Vax V-041/2 9th.qxd 2/23/05 12:34 PM Page 5