Filter
Top Products
3
107098
OWNER’S MANUAL
For more information, visit www.desatech.com
PRODUCT
IDENTIFICATION
Figure 1 - Vent-Free Gas Log Propane/LP Gas Space Heater
UNPACKING
1. Remove heater from carton.
2. Remove all protective packaging ap-
plied to heater for shipment.
3. Make sure your heater includes two
hardware packets.
4. Check heater for any shipping damage.
If heater is damaged, promptly inform
dealer where you bought heater.
ASSEMBLY
ASSEMBLING HEATER
Tools Required:
• Phillips screwdriver
• 5/16" hex wrench
• slotted screwdriver
Removing Front Panel Of Heater
1. Remove two screws near bottom cor-
ners of front panel with Phillips screw-
driver.
2. Pull bottom of front panel forward, then
down (see Figure 2).
Figure 2 - Removing Front Panel of Heater
Continued
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
SDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIG
LFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIG
LFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIG
LFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'ASDFKIG
LFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIG
LFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'f
SDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'ASDFKIG
LFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIG
LFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIG
LFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
Ignitor Button
Screen
Front
Panel
Heater
Cabinet
Log
Lighting and
Warning Plates
Control Knob
PRODUCT
FEATURES
SAFETY DEVICE
This heater has a pilot with an Oxygen
Depletion Sensing (ODS) safety shutoff
system. The ODS/pilot is a required feature
for vent-free room heaters. The ODS/pilot
shuts off the heater if there is not enough
fresh air.
PIEZO IGNITION SYSTEM
This heater has a piezo ignitor. This system
requires no matches, batteries, or other
sources to light heater.
THERMOSTATIC HEAT
CONTROL
This heater has a thermostat sensing bulb
and a control valve. This results in the great-
est heater comfort. This can also result in
lower gas bills.
Note:
Do not remove
Lighting and Warning
Plates from heater
Installing Hood
1. Remove hood from protective tray.
2. Locate 4 black sheet metal screws in-
side hardware pack.
3. Place hood on deflector and line up
holes (see Figure 3, page 4).
4. Secure hood to deflector with 4 black
sheet metal screws.
Note:
Side of hood should be on the outside
flange of deflector.
Installing Log
Note:
For easier installation, lay heater on
its back.
1. With Phillips screwdriver, remove two
screws holding screen in place. Remove
screen.
2. Remove log from inside of deflector.
Discard protective packaging.
3. Gently slide log between log retaining
brackets on deflector assembly (see Fig-
ure 3, page 4). The log should fit firmly
against bottom of log retaining brackets.
4. Reattach screen using two screws re-
moved in step 1.