Filter
Top Products
Ussc 3
ASSEMBLY
Flue Collar Assembly:
1. Mount the flue collar to the top of the unit as shown using the (3)
5/16-18 x 1-1/2 bolts, (3) washers, and (3) weld
tabs
provided in the parts box.
Blower Chute Assembly:
1. Locate the Heat Shield Deflector. Using the three(3) 1/2 Tek Screws provided, mount the deflector to the unit as
shown in the diagram.
Ash Pan Assembly:
1. Locate
the two(2) Ash Pan Supports welded under the
unit, then simply slide the ash pan into place under the unit.
Replace the Fire Brick as shown in the illustration below.
Side view of flue collar
mount to heater top
Ash PLug
Brick Placement
5/16-18 x 1-1/2
Bolt
Heater top
Weld Tab