Filter
Top Products
24 ■English
Check
■ Before a long idle period
1. Operate the “FAN only” for several hours on a warm day to dry out the inside.
• Press “MODE” button and select “FAN” operation.
• Press “ON/OFF” button and start operation.
2. After operation stops, turn off the electrical circuit breaker for the room air
conditioner.
3. Remove and clean the air filters. Reinstall filters after cleaning.
4. Take out batteries from the remote controller.
NOTE
Check that the base, stand and other fittings of the outdoor unit are not decayed or corroded. Check the
units to ensure they are level and secure.
Check that nothing blocks the air inlets and the outlets of the indoor unit and the outdoor unit.
Check that the water drains smoothly out of the drain hose during COOL or DRY operation.
• If no drain water is seen, water may be leaking from the indoor unit. Stop operation and consult your
authorized dealer.
• Operation with dirty filters:
(1) cannot deodorize the air. (2) cannot clean the air.
(3) results in poor heating or cooling. (4) may cause odor.
• To order air-purifying filter with photo catalytic deodorizing function contact your authorized
dealer where you bought the air conditioner.
• Dispose of old filters as required by local codes.
Item Part No.
Air-purifying filter with photo catalytic deodorizing function.
(without frame) 1 set
KAF952A42
01_EN_3P141693-2C (A4).fm Page 24 Saturday, September 25, 2004 11:39 AM