Filter
Top Products
16 ■English
HOME LEAVE Operation
HOME LEAVE operation is a function which allows you to
record your preferred temperature and airflow rate settings.
■ To start HOME LEAVE
operation
1. Press “HOME LEAVE button” .
• The HOME LEAVE lamp lights up.
■ To cancel HOME LEAVE operation
2. Press “HOME LEAVE button” again.
• The HOME LEAVE lamp goes off.
Before using HOME LEAVE operation.
■
■■
■ To set the temperature and airflow rate for HOME LEAVE operation
When using HOME LEAVE operation for the first time, please set the temperature and airflow
rate for HOME LEAVE operation. Record your preferred temperature and airflow rate.
1. Press “HOME LEAVE button”. Make sure “ ” is displayed in the remote
controller display.
2. Adjust the set temperature with “ ” or “ ” as you like.
3. Adjust the airflow rate with “FAN” setting button as you like.
Home leave operation will run with these settings the next time you use the unit. To change the
recorded information, repeat steps 1 – 3.
F
TEMP
ON/OFF
POWERFUL
HOME LEAVE
MODE
TIMER
FAN
SILENT
SWING
ON
CANCEL
OFF
SENSOR
1, 2
F
Initial setting Selectable range
temperature Airflow rate temperature Airflow rate
Cooling 77°F AUTO 64-90°F 5 step, AUTO and SILENT
Heating 77°F AUTO 50-86°F 5 step, AUTO and SILENT
01_EN_3P141693-2C (A4).fm Page 16 Saturday, September 25, 2004 11:39 AM