Trane
www.trane.com
01/12
The manufacturer has a policy of continuous product and product data improvement and it reserves the right
to change design and specifications without notice.
Mechanical Specification
Options
General
The 4TTB4 is fully charged from the
factoryforup to15feetof piping.This
unit is designed to operate at outdoor
ambienttemperaturesashighas115°F.
Cooling capacities are matched with
a wide selection of air handlers and
furnacecoilsthatareAHRIcertied.The
unit is certied to UL 1995. Exterior is
designedforoutdoorapplication.
Casing
Unit casing is constructed of heavy
gauge, G90 galvanized steel and
paintedwithaweather-resistantpowder
paint on all louvers, panels, prepaint
on all other panels. Corrosion and
weatherproof CMBP-G30 DuraTuff™
base.
Refrigerant Controls
Refrigeration system controls include
condenser fan and compressor
contactor. High and low pressure
controlsareinherenttothecompressor.
A factory installed liquid line drier is
standard.
Compressor
The Climatuff
®
compressor features
internal over temperatureand pressure
protection and total dipped hermetic
motor. Other features include: roto
lock suction and discharge refrigerant
connections, centrifugal oil pump and
lowvibrationandnoise.
Condenser Coil
The outdoor coil provides low airow
resistance and efcient heat transfer.
Thecoilisprotectedonallfoursidesby
louveredpanels.
Low Ambient Cooling
Asmanufactured,thisunithasacooling
capability to 55°F. The addition of an
evaporator defrost control with TXV
permitslowambientcoolingto30°F.
Accessories
Thermostats — Cooling only and
heat/cooling (manual and automatic
changeover). Sub-base to match
thermostatandlockingthermostatcover.