Toshiba RAS-B10EKVP-E Air Conditioner User Manual


 
– 49 –
DescriptionOperation flow and applicable data, etc.Item
* When the previous operation was the
operation of air conditioner + air purifier,
an operation of air conditioner + air
purifier starts by pushing AC button on
the remote controller.
(Operation of air conditioner + air
purifier is stored in memory.)
Sending air purifier-ON
OPERATION indicator ON
Fan ON
Air purifier ON
Air purifying operation
Start of air purifier-ON
Memory position
of louver/COOL
Air conditioner +
air purifier operate
1
,
2
1 2
Air conditioner stops Air conditioner operates
*1
*2
OPERATION indicator OFF Filter-OFF
Fan stop
Air purifier-OFF
Louver close
All stop
Air conditioner operates
Sending air purifier-OFF
3
3 4
,
4
Air purifier operates Air conditioner +
Air purifier operate
This function generates nagative ion while cleaning the
air in the room.
If air purifier-ON signal is received while the air condi-
tioner stops, the air purifier starts operation, and if it is
received while the air conditioner operates, the air
conditioner and the air purifier start operation.
The air ion generator operates linked with the air
purifying operation.
12. Air
purifying
control
*1 Swing is available
*2 Fan speed is Fan Auto mode varies in
order, (M + 1) (L) (L–) (SL).
Operation button
Air conditioner
AC operation*
AC + Air purifier
All stop
All stop
Present
status
Stop
Air purifier only
Air conditioner
Joint use of AC
and air purifier
PURE button
Air purifier
Stop (All)
AC + Air purifier
AC operation
Air purifying
operation
AC + Air purifying
operation
Louver*1
Cooling position
Follows to
AC operation
Fan speed *2
AUTO, L, L+, M,
M+, H
Follows to
AC operation