Filter
Top Products
– 92 –
No. Part name
Electric parts
box assembly
Procedures Remarks
<How to assemble the electric parts box>
1) Hook the top part of the electric parts box
assembly onto the claws on the back body,
and secure it using the fixing screw.
Now attach the display unit. Connect the
connectors for the fan motor and louver motor.
2) Secure the grounding wire using the fixing
screw. Insert the TC sensor into the sensor
holder.
* Be absolutely sure to loop the grounding
wire and TC sensor leads once at the
bottom.
4) Disengage the display unit by simply pushing
at the top of the display unit.
5
) Remove the fixing screw that secures the
conduit mount, electric parts box assembly,
LED assembly and remove the assembly.
Electric art
box cover's screw
TC sensorEarth Screw
Fan motor
connector
Louver
motor
connector
Fixing screw
LED assembly
Fixing screw
Loof the qrunding wire
p
FILE NO. SVM-10020
1) Remove screw of earth lead attached to the
end plate of the evaporator.
2) Remove the lead wire cover, and remove
connector for the fan motor and connec-
tor for the louver motor from the electric
parts box assembly.
3) Pull out TC sensor from sensor holder of the
evaporator.
Conduit mount's screw