Thermo Products MDA1-100N Furnace User Manual


 
All installations and services must be performed by qualified service personnel.
2
It is absolutely essential that a damage report be obtained. If a concealed
damage report is not obtained, we cannot provide assistance in recovering your
claim against the transportation company.
Warranties
:
The manufacturer of this equipment assumes no liability for any
damages resulting from unauthorized modifications made to the
furnace, or components thereof, or improper installation of the furnace
in the field. Furthermore, any such field modifications VOID THE
WARRANTY and place the responsibility for safe and reliable operation
of the furnace on those who performed the modification(s).
Make certain the warranty cards are returned. These must be on file to verify
installation dates for replacement of any warranted part(s).
I. Safety
:
The following guidelines and warnings should be read and understood
before continuing with the installation of this furnace. Failure to follow
these guidelines can result in improper and unsafe operation of this
appliance, which can cause substantial property damage, severe
personal injury, or death.
These instructions must be read in their entirety before installing the furnace. It is
the installer's responsibility to do the following:
1. Use only with the type of gas approved for this furnace. Refer to the furnace
marking plate.
2. Install this furnace only in a location and position as specified in Section II, B
of this manual.
3. Provide adequate combustion and ventilation air to the furnace space. Refer
to Sections II, E of this manual.
4. Connect this furnace to an approved vent system only. Combustion products
must be vented outdoors. Refer to Section II, J of this manual for vertical
vented units.