Filter
Top Products
All installations and services must be performed by qualified personnel.
10
UNIT WIRING DIAGRAMS
SINGLE PHASE THREE PHASE
c WARNING: CORRECT POLARITY REQUIRED.
IF UNIT FAILS TO START PROPERLY, SWAP POWER WIRES.
SPECIFICATIONS
INPUTS
R, R-C, C Secondary of control transformer ~ 18-30 VAC
Y, R From Thermostat
LPC1, LPC2 Low Pressure Switch
HPC, HPC High Pressure Switch
OUTPUTS
CC Compressor Contactor ~ 1.5 Amp
ALR Alarm Output (Switched R) ~ 2 Amp
TOLERANCE
RANDOM START 150-180 seconds*
DELAY ON BREAK fixed 180 seconds*
TEST MODE DOB = 10 seconds, RNDM STRT = 3 seconds*
*All timings +/- 10%