Filter
Top Products
ATTACH TRANSPORT CLIP - continued
UNIT READY FOR INSTALLATION
10
11
Attach Transport Clip to
Frame
Close door into frame ensuring
margins are even at head jamb.
Fasten transport clip to frame
with (2) #6 x 3/4” flat head
screws.
Unit can now be transferred for installation. Gather any remaining
components and hardware as they may be used for installation.
See “Unit Installation” instructions.
#6 x 3/4"
flat head
screws
Attach Transport Clip to Door
Place flattened transport clip on top of
door approximately 1 to 2 inches from
lock side edge.
Fasten with (2) #6 x 3/4” flat head screws.
#6 x 3/4"
flat head screws
14