Filter
Top Products
Part identification - continued
Tools/materials required
#10 x 3/4”
flat head screw
#8 x 1-1/4”
flat head screw
#8 x 3/4”
wafer head screw
#10 x 2-1/2”
flat head screw
#8 x 2”
flat head screw
#6 x 3/4”
flat head screw
#8 x 3/4”
flat head screw
This is a listing of tools that may be required to assemble unit.
• Drill/screw gun
• Phillips head drive bit or screwdriver #2 & #3
• Silicone sealant and caulk gun
• Utility knife
• Rubber mallet
• Hammer
• Staple gun with 1/2” x 7/16” crown staples
• 3/32” & 1/8” dia. drill bit
• (2) 2 x 6 boards - 38” long
#8 x 5/8”
flat head screws
2