Filter
Top Products
44130-01 • 12/04/2012
16
Under your menu options you have the ability to reset your lter counter,
span settings, and temperature measurement. After making changes
to each menu option, the thermostat will show “Updated!”, save your
changes, and move you back to the home screen.
To access these options:
1. Press the button.
2. Once in the menu options list, use the or buttons to scroll through
the menu items. The button will take you into the selected menu
item. To escape menu options, select a menu item by pressing ,
then press again.
3. RESET FILTER: If the lter indicator is ashing on the home screen
you can reset it here. Use the or buttons to select “Filter” and
press . The screen will ash “Updated!” and return to the home
screen.
4. SPAN 1: The next menu option is to set your thermostats primary
span. Use the or buttons to adjust between 1, 2, or, 3 degrees.
Press , the screen will ash “Updated!” and return to the home
screen. The span setting regulates when and how long your system
will run. The span has been set at the factory to 2 which will allow
the system to turn on 2
O
F (1
O
C) above or below the set temperature.
Menu Options