Filter
Top Products
7
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Log Placement
WARNING: THE SIZE AND POSITION ON
THE LOG SET WAS ENGINEERED TO GIVE
YOUR APPLIANCE A SAFE, RELIABLE
AND ATTRACTIVE FLAME PATTERN.
ANY ATTEMPT TO USE A DIFFERENT
LOG SET IN THE FIREPLACE WILL VOID
THE WARRANTY AND WILL RESULT IN
INCOMPLETE COMBUSTION, SOOTING,
AND POOR FLAME QUALITY.
WARNING: LOGS GET VERY HOT AND
WILL REMAIN HOT UP TO ONE HOUR
AFTER GAS SUPPLY IS TURNED OFF.
HANDLE ONLY WHEN LOGS ARE COOL.
TURN OFF ALL ELECTRICITY TO THE
APPLIANCE BEFORE YOU INSTALL
GRATE AND LOGS.
WARNING: THIS APPLIANCE IS NOT
MEANT TO BURN WOOD. ANY AT-
TEMPT TO DO SO COULD CAUSE IR-
REPARABLE DAMAGE TO YOUR APPLI-
ANCE AND PROVE HAZARDOUS TO
YOUR SAFETY.
Figure 6
D, DT, DR-500 MODEL
Figure 7
Carefully position the ceramic fiber logs and twigs over the burner as shown in
Figure 7 (D, DR,
DR-500), 8 (D, DT,DR-600) or 9 (D, DT, DR-800)
. For more detailed placement instructions,
refer to the LOG PLACEMENT GUIDE accompanying this document.
Proper twig placement is critical to prevent sooting. Twigs should be placed in the gaps between
the flame peaks and should be positioned so that at no time they impinge the flames.
Figure 8
Figure 9
D, DT, DR-600 MODEL
D, DT, DR-800 MODEL
(Fire shown with optional Brick Liner Kit)
(Fire shown with optional Brick Liner Kit)
Adjustment Rod
Up (Fully Open
Position)
Air Shutter
Venturi
Adjusting
Set Screw
Adjustment Rod Down
(minimum air
opening position)
RIAYROTCAF
GNITTESRETTUHS
)mm(sehcni
sledoM
TD,D
RD&
saG
epyT
snoitacilppA
ehtgnisu
ecnailppA
tneVpoT
snoitacilppA
ehtgnisu
ecnailppA
tneVraeR
005
.taN23/3)83.2(23/3)83.2(
.porP8/1)81.3(8/3)25.9(
006
.taN23/3)83.2(23/3)83.2(
.porP8/3)25.9(8/3)25.9(
008
.taN61/3)67.4(61/3)67.4(
.porP2/1)31(2/1)31(