Filter
Top Products
Using Your Heater
Locating Guides
Locating Tabs
6
Attaching the castors
Carefully position the heater upside down on
a soft cloth or carpet.
Use the 4 wing nuts provided to fi x the
castors to the heater base.
1.
2.
Switching the heater on
Place the heater on a fl at level surface.
Insert the plug into a 230/240V power outlet
and turn the power on.
Turn the heat setting dial to low, medium or
high depending on your preference.
1.
2.
3.
Setting the thermostat
Set the thermostat to the highest setting by
turning the dial clockwise as far as it will
turn.
When the room has reached the desired tem-
perature level, lower the thermostat setting
by turning the thermostat dial anticlockwise
until it clicks. This is the current room
temperature, and your heater will aim to
maintain this set temperature.
The thermostat is now set and will maintain
the pre-set temperature level by automatically
switching the heater on and off depending on
the room temperature.
NOTE: Be careful not to overheat the room
by leaving the heater on maximum heat and
maximum thermostat for extended periods of
time.
1.
2.
sun_6100.indd Sec1:6 14/01/2008 6:36:38 PM