Filter
Top Products
8
Care And Cleaning
Ensure that the heater is switched off and
disconnected from the power outlet before
cleaning.
Carefully wipe the exterior of the heater with
a soft damp cloth and dry thoroughly with a
dry cloth.
Over time, dust may accumulate on the vents.
This dust can be removed by wiping with a
damp cloth, or by using the brush attachment
to your vacuum cleaner.
Store the heater in a cool dry place when
not in use. Store the heater in its carton
if possible, to prevent scratching and dust
accumulation.
Troubleshooting Guide
Resetting the safety auto shutoff
Remove any blockage from the heater vents.
Switch the heater off by rotating the top
control dial to OFF.
Unplug the heater and wait 5-10 minutes for
the heater to cool down.
Once the heater has cooled down, plug the
heater into the power outlet and operate
normally.
1.
2.
3.
4.
If your heater fails to operate check the
following:
Make sure the electrical outlet or circuit
breaker is working, and the thermostat is set
to an appropriately high setting.
Check for obstructions. If you fi nd an
obstruction, turn the heater off and follow
the reset instructions in this section.
•
•
sun_6100.indd Sec1:8 14/01/2008 6:36:45 PM