Filter
Top Products
Using Your Heater
6
Switching the heater on
Place the heater on a fl at level surface and
ensure that the air intake and outlet are clear
of obstructions.
Insert the plug into a 230/240V power outlet
and turn the power on.
Turn the thermostat dial to the highest
setting by rotating the dial clockwise as far
as it will turn.
Turn the mode selector dial to the desired
heat setting, I or II.
Using the fan without heat
To use the fan without heat, set the thermo-
stat dial to the lowest setting and select the
fan setting
on the mode selector dial.
1.
2.
3.
4.
•
Setting the thermostat
Set the thermostat to the highest setting by
turning the dial clockwise as far as it will
turn.
When the room has reached the desired
temperature level, lower the thermostat
setting by turning the thermostat dial
anticlockwise until it clicks. The heater will
stop operating.
The thermostat is now set and will
maintain the pre-set temperature level by
automatically switching the heater on and off
depending on the room temperature.
1.
2.
3.
sun_2050.indd Sec1:6 8/01/2008 22:23:18