Filter
Top Products
3.5.4. Observing processing status
Select ”Status”.
Acknowledge with the ENTER-key.
or
Press the ”K1”-key.
&
The current operation status of individual assembly parts is displayed:
e.g.: valve block moved in/moved out/error
“moved in” = The upper drying cells are within the drying circuit; the lower
ones are regenerated.
“moved out” = The upper drying cells are regenerated; the lower ones are
within the drying circuit.
“error” = An error has occurred.
Other operation statuses:
“on” = in operation,
“off” = out of operation,
“open” = opened,
“shut” = closed.
Press the “F1"-key.
036-2MS
STT 1600
Start-up 3-13