Filter
Top Products
2-56
STEP3: Click the [Apply] button to start upgrading
STEP5: The upgrade process window shows a progress bar indicating upgrade status.
STEP6: The system will reboot after profile upload.
Save & Reboot
This section tells you how to save all the settings and reboot this IP device. This is
critical because some settings might not take effect before save and reboot. Click the
[Save & Reboot] item to display the “Reboot Page”.
The Action LED indicator will go dark to indicate that the IP device is rebooting. After
around 30 seconds, the Action LED will light up again to indicate that the reboot is
completed.
Logout
Clicking this item allows you to log out of the IP device. Be sure to logout this IP device
once your setting is completed.