Filter
Top Products
6
Step 4: Attach bracket B to the TV
Before attaching bracket B, remove the rear cover of the TV and disconnect all
the cables from the TV.
For how to remove the rear cover of the TV, refer to the Operating Instructions
supplied with the TV.
(The illustrations used in this manual show the KLV-21SR2/KLV-L23M1 as
examples.)
1
Remove the screws as shown below, and remove the TV
stand from the TV.
To prevent damaging the surface of the LCD display, place the TV on a
soft mat.
Notes
• Place the TV body only on the table as shown above. If the TV stand is also on the
table, the TV body may be unstable and cause damage.
• When removing the TV stand, hold it firmly.
2
Secure bracket B to the TV firmly using the four screws
removed in step 1.
Rear of the TV
Bracket B
Remove the four
screws.
TV stand
Rear of the TV
Soft mat
KLV-21SR2 KLV-L23M1
Remove the six screws.
(M4 type for bracket
B)
Remove the two
screws and hinge
cover.
Soft mat
TV stand
To secure bracket B to the TV,
use the screws removed from the
TV stand, not the ones from the
hinge cover.
Rear of the TV