Filter
Top Products
Using Your Menus (continued)
Using the SET UP I_ menu
SET UP ]
! CHANNEL SET UP
FAVORmE CHANNEL I
VIDEO LABEL
LANGUAGE: ENGLISH
TILT CORRECTION: 0
_MENU
Move_ Sel_t[_ Exit_
For detailed information on using the remote
control to modify menu settings, refer to
"Learning menu selection" on page 19.
To select the SET UP _ menu:
Display _ HighlightI_ _=i1_ Select
-.o @ @
Notes
• The FAVORITE CHANNEL feature is not
available for the AUX input.
• Your remote control can be programmed to
operate your cable box. (see page 28)
• After setting CABLE, you will need to run
AUTO PROGRAM.
• ON/OFF TIMER and CHANNEL BLOCK
settings will be erased when CHANNEL
FIX is set.
CHANNEL
SET UP
Basic set up
options for
viewing
24
With the CHANNEL SET UP menu open:
Press t or _.to access a feature, then press _.
CABLE: Select ON ifyour TV is connected to a cable
system.
CHANNEL FIX: Press * or_,to set the TV's input to one
of the following options:
2-6: When a cable box is connected tothe VHF/UHF
CHANNEL SET UP
l* CABLE:ON
CHANNEL FIX:OFF
AUTO pROGRAM =
CHANNEL SKJp/ADD !
CHANNEL CAPTION
_MENU
Move_ SeleCt_:J Ex_
input. Press DBS/CABLE (FUNCTION) and then CH +/- to change channels
through your cable box.
AUX 2-6: When a cable box is connected to AUX and a cable or antenna is
connected to VHF/UHF. You can alternate between the two inputs by pressing
ANT on the remote control.
VIDEO 1: When you have connected video equipment (e.g. AN receiver) and
you want the TV input fixed to it. You will be able to alternate between video
sources using the AN receiver.
OFF: When you want to turn CHANNEL FIX off.
AUTO PROGRAM: Instructs the TV to program all receivable channels.
CHANNEL SKIP/ADD: With the CHANNEL SKIP/ADD
window open:
1 SelectthedesiredchanneL
2 Press _ to SKIP or ADD (only one option will
be available).
CHANNEL CAPTION: Label up to 12 channels with their
call letters (up to four letters).
With the CHANNEL CAPTION menu open:
1 Press _ and then • or ,I,to access the desired
channel, and press _ again.
2 Press ,I.or ,I.to display the first letter or number
ofthe caption and press _ to select it.
3 Press _ to activate. To erase a caption, press RESET.
J CHANNEL SKIP/ADD 33
SKEP
I*ADD
_MENU
USe [0"91 or [CH +/-]
_ _1t_ U_ channel
I C_NEL _PTION
I. CH,_INEL ,_
CAPTION _ _
_MENU
h_ve[l_ Sel_[_ Exit_