Filter
Top Products
Using Your New TV
Setting up the TV automatically
The Easy Setup Guide allows you to set the
on-screen language and set all receivable
channels in one step.
The AUTO PROGRAM function of the Easy
Setup Guide feature does nat apply for
installations that use a cable box for all channel
selection.
To set up the TV manually, refer to "Using the
SET UP menu" on page 24.
Tips "_"
• Performthisfunctionduringtheday, withthe
antenna and/or cable properly connected, to ensure
that all available channels will be broadcasting and
receivable.
• The TV must be set to the TV input to execute
AUTO PROGRAM. Press TV/VIDEO until a
channel number appears.
• If your cable or antenna is connected to AUX,
press ANT until AUX appears next to the channel
number,
14
Using the buttons on the top of the TV:
000088 0
SETt,P TV/_CrcO _ VGLL_JE+ - C_INEL + POlaR
Press POWER to turn on the "Fv'.
The Easy Setup Guide screen appears.
ESPA;;_: [CH-]
Atrro _r uP: (vc_-i
DE_: {WIVIDEO ]
Press CH + to select ENGLISH, CH - to
select ESPANOL or VOL + to select
FRAN_AIS.
The screen will change to reflect your
choice.
I ENGk_H: JCH+J
R_N_.AIS: [ VI_÷]
OE_: [W/VIDEO ]
_ [S_ UPI
For a DEMO of functions and menus,
press TV/VIDEO.
3 Press VOL - to continue.
_-_ I AUTO PROGRAM
AUTO PROGRAM appears and the TV
starts scanning and presetting channels
automatically. If the TV receives cable
channels, CABLE is set to ON automatically.
To perform AUTO SET UP again
Press the SET UP button on the TV and follow
steps 2-3.
Notes
• Before you perform Easy Setup Guide again,
make sure that the input from ANT (not AUX)
is selected by pressing ANT until "AUX" does
not appear next to the channel number.
• When you perform AUTO PROGRAM, your
CHANNEL FIX,TIMER, and CHANNEL
BLOCK settings will be erased.
• To reset your TV to factory settings, turn the
TV on. Then; while pressing the RESETbutton
on your remote control, press the POWER key
on your TV. The TV will turn itself off, then
back on.