Filter
Top Products
10
d) Press the Mode Button until the “AUTO” appears on the LCD display.
e) Select the fan speed by using FAN button.
During the AUTO model, the unit operates at heating mode when the room temperature is below 68
degree. It operates at dehumidifying mode when the room temperature is between 68 to 80 degree. It
operates at cooling mode when the room temperature is above 80 degree. You may use the timer with the
AUTO mode.
6)
Sleep Mode
a) The air conditioner in operation
b) Press SLEEP to enter into sleep mode
c) The fan motor of indoor unit runs in low speed
d) When in cooling mode, within the first two hours, the temperature will be increased 1℉
per hour. Then temperature will be keeping at 2℉ higher than the original degree for 6
hours.6 hours later, temperature will return to original degree you set.
e) When in heating mode, within the first 2 hours, temperature will be decreased 1℉ per
hour. Then temperature will be keeping at 2℉ Lower than the original degree for 6
hours.6 hours later, temperature will return to original degree you set.
g) When in dehumidify mode, the temperature will not be changed.
NOTE: When the room temperature is low and the indoor humidity is high, the condensate of the air
conditioner may not be discharged in time. Water will accumulate in the unit that leads to the unit stops
working automatically for a long time. (At the moment, the indicator lamp “WATER FULL” in the LCD
is light.) In order to let your unit recover working quickly, you can pull out the “Drain Port” which is
located in the middle and bottom of the back of the unit. The condensate will be discharged several
minutes after water be drained. Please use at least 1.5 liter pan to catch the dripping water.
It is not advised to use continuous drain method when the room temperature is higher than 90℉.
OPERATION USING REMOTE CONTROLLER
The remote controller provided with the unit may operate this portable air conditioner. The remote
controller uses two - AAA batteries (provided). Install the batteries before using the remote controller.
REMOTE CONTROLLER
You may use the remote controller to do all the operations. You can only turn on or off the swing
operation from the remote controller.
The LTD displays on remote controller either in Celsius or Fahrenheit. Press + and - keys
simultaneously to change the display from Celsius to Fahrenheit or vice verse.