Filter
Top Products
CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS
CONTROL PANEL
TEMPERATURE
AND TIMER
INDICATOR
9
FAN SPEED MODE
TIMER/TEMP DECREASE
POWER
TIMER/TEMP INCREASE
TIMER
OPERATING INSTRUCTIONS
1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER
button once more to turn the unit off.
2) Mode Selection - Press the MODE Button repeatedly to cycle between the different modes: Air Condi-
tioner and Dehumidifier.
3) Fan Speed Control - Press the FAN Button to cycle through the different fan speeds: High and low.
4) Temperature - Select the desired temperature by pressing either ▼ or ▲ key when using the unit in
cooling mode. The temperature indicator flashes to display the desired temperature setting. After the tem-
perature is set, the unit will display this temperature setting until it is changed by the user. The temperature
indicator display shows temperature in Celsius or Fahrenheit. Press the ▼ and ▲ simultaneously to
change between Celsius and Fahrenheit .
5) Auto-on Timer- To program the Auto-on timer, press the TIMER button when the unit is powered off.
Once the TIMER button is pressed the hours will blink on the display. Press the ▼ or ▲ buttons to
change the number to the desired hours (1-24 hours) for the unit to automatically turn on. The timer is set
when the TIMER stops flashing.
6) Auto-off Timer- To program the Auto-off timer, press the TIMER button when the unit is powered on.
Once the TIMER button is pressed the hours will blink on the display. Press the ▼ or ▲ buttons to
change the number to the desired hours (1-24 hours) for the unit to automatically turn off. The timer is set
when the TIMER stops flashing.
NOTE: Heat mode is not available on this model.
- Press the POWER button once to manually turn the unit on. Press the POWER
button once more to turn the unit off.
2) Mode Selection
$LU&RQGLWLRQHUPRGHRQO\