Filter
Top Products
7
MAINTENANCE
1. Unplug the unit and let it cool completely.
2. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild
detergent if necessary. After cleaning, dry the unit with a soft cloth. CAUTION: DO NOT let liquid
enter the heater.
3. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the
heater. This may cause damage or deterioration to the surface of the heater.
4. DO NOT immerse the heater in water.
5. Wait until the unit is completely dry before use.
STORAGE
Store the heater in a cool, dry location when not in use. Preferably, to prevent dust and dirt build-up, use the
old packaging to repack the unit.
TROUBLESHOOTING
If the heater will not operate, please check the following before seeking repair of service:
HEATER WILL NOT WORK
1. Check if the power cord is plugged into an electrical outlet, if not, plug in.
2. Check if electricity to the main fuse is working.
3. Check if the heater is on HIGH or LOW by confirming that one of the corresponding indicator lights is on.
If not, press the H/L button to turn on.
4. Check if the heater is on a firm, level surface. If the tip-over safety switch is not pushed in, the heater will
not run.
HEATER WILL NOT OSCILLATE
1. Check if the SWING indicator light is on. If not, press the SWING button to turn on oscillation.
2. Confirm that nothing is blocking the movement of the heater.