Filter
Top Products
5
ASSEMBLY
Remove the heater body, two base pieces, and fastening screw from the box. Remove the packaging
materials and keep for future storage.
Lay the heater body on a level surface. To assemble the base, insert the 6 round pegs of base B into
the round holes of base A until you hear a clicking noise. (Figure 1)
Pull the power cord through the hole at the center of the base, and align the base with the bottom of
the heater. The power cord should fit through the slot in the base. Screw on the fastener to finish as-
sembly. (Figure 2)
Fix the remote control holder on the back of the heater. (Figure 3)
Figure 1
Figure 2
Figure 3