Filter
Top Products
9
Auto Mode
3) Fan Speed Control
Select the fan speed for:
High
Medium
Low
The fan speed can be visually distinguished by the speed of the digital air segments progressing
out from the windmill fan image on the VFD display.
4) Temperature
Select the desired temperature by pressing either ∧or ∨ key when using the unit in cooling or
heating function. The VFD flashes to display the desired temperature during the setting. The
VFD displays set temperature when it is not at temperature setting mode.
The VFD display either in Celsius or Fahrenheit. Press the
o
F /
0
C button on the control panel to
select desired temperature.
5) Timer
To program the timer, press Timer On key until the VFD display shows a flashing “
”.
Pressing either /\ or \/ keys to change the clock to the desired time for the unit being turned on.
Press Timer Off key and the VFD display will show a flashing “
”. Pressing either /\
or \/ keys to change the clock to the desired time for the unit being turned off.
The light will flash for 3 seconds to activate the timer you programmed.
6)
o
F /
0
C
To switch from Celsius to Fahrenheit press the display button labeled
o
F or
0
C for desired
temperature setting.
OPERATION USING CONTROL PANEL
1) Cooling Operation
a) Install the exhaust ducts properly.
b) Plug the Power Cord to the power outlet.
c) Turn on the unit by pressing the On/Off Button on the control panel.
d) Press Mode Button until “
” appears on the VFD display
e) Press the button ∧ or ∨ until the desired room temperature appears on the
VFD. The temperature ranges from 61
o
F-88
o
F (16
o
C-31
0
C).
f) Select the fan speed by pressing the Fan Button.