Filter
Top Products
LIGHT
12
REMOTE CONTROL OPER ATING INSTRUCTIONS
In Cooling or Dehumi (DRY) modes: When sleep
mode is selected the set temperature will automatically
increase 2°F after 1 hour. After 2 hours, the set tempera-
ture will increase another 2°F for a total increase of 4°F.
Press the LIGHT button to turn the on the display Light.
A small Light bulb icon will light up on the remote con-
trol display.
Press the SLEEP mode button to engage SLEEP
mode.. This feature limits compressor usage and
enhances energy savings by adjusting the set
PEELS eht sserP .gnipeels era uoy elihw erutarepmet
button once more to disable Sleep Mode. Sleep Mode
is not available in Auto or Fan Modes.
In Heating mode (GH-PAC-12E1HP only): When sleep
mode is selected the set temperature will automatically
increase 2°F after 1 hour. After 2 hours, the set tem-
perature will decrease another 2°F for a total decrease of
4°F.
REMOTE CONTROL
SLEEP
SLEEP BUTTON
LIGHT BUTTON
Blow
Blow
LOCK
LOCK FUNCTION
• Press “+” and “-” buttons together at the same time to
lock the remote keyboard. Do this again to unlock.
AUTO
AUTO MODE
• Press the MODE button to select Auto Mode. Once
Auto Mode is selected the unit will automatically
moor tnerruc eht no desab edom gnitarepo eht esoohc
no deyalpsid eb ton lliw erutarepmet ehT .erutarepmet
the LED in this mode.
TEMP
MEASURE
CHANGE BETWEEN F° and C°
• When the unit is o , press the MODE and “-” button
to change between F° and C°.
BLOW
Press the blow button to enable the blow function.
When enable, blow will force the fan to remain on once
the unit is powered down. The fan stays on to dry out any
remaining moisture in the unit to help minimize mold or
bacteria growth. This function only works under cooling
mode.