Filter
Top Products
10
REMOTE CONTROL OPER ATING INSTRUCTIONS
Press the ON/OFF (POWER) button once to manually
turn the unit on. Press the Power button once more to
turn the unit
NOTE: Heat Mode is only
available on GH-PAC-12E1HP
Press the MODE Button repeatedly to cycle between the
di
erent modes.
When the unit is in Air Conditioner or Heater (GH-PAC-
12E1HP) mode you can select your desired temperature.
Press the TEMP SELECT buttons (+ or -) to select
your desired temperature setting. The temperature on the
LCD display on the remote control will increase or de-
crease accordingly. Hold the +/- buttons for two seconds
to rapidly increase or decrease the temperature. Temp.
range is 61°F—86°F.
Press the Fan Speed button to change fan speeds.
Fan Speeds:
NOTE: When the unit is in Dehumid (DRY) mode,
the fan speed is not adjustable.
Press the Up and Down Swing Button to turn on and
the vertical swing mode. In vertical swing mode, the lou-
vers will rotate up and down to circulate more air.
When the unit is o , press the Up and Down Swing But-
ton and “+” at the same time to enable stationary swing
mode. Stationary Swing mode allows for more control
over the way the louvers swing up and down. The Swing
icon on the Remote LCD will blink twice when this is
Blinks for 2 Seconds
In Stationary Swing mode, press the Up and Down
Swing Button to change the swing pattern per below:
Disable Stationary Swing Mode by pressing the Up and
Down Swing Button and “+” button at the same time.
The Swing Icon on the Remote LCD will blink twice
when this is disabled.
REMOTE CONTROL
MODE
MODE BUTTON
ON/OFF
ON/OFF BUTTON
FAN
FAN BUTTON
- / +
- / + BUTTONS
SWING BUTTON
AUTO
COOL
DRY
FAN
HEAT
Low Speed Medium Speed
High Speed
SIGNAL TRANSMITTER
BLOW