Soleus Air GB-TTW-10ESE Air Conditioner User Manual


 
4
READ THIS SECTION BEFORE ATTEMPTING TO OPERATE YOUR AIR CONDITIONER
The power supply cord contains a current device that senses damage to the power cord. Follow the instructions below to
test your power cord.
1. Plug in your air conditioner
2. The power supply cord will have TWO buttons on the plug. Press the TEST button. You will notice a click as the
RESET button pops out.
3. Press the RESET button. The button will click when the RESET button engages.
4. The power supply cord is now supplying electricity to the unit.
NOTE:
Do not use this device to turn the unit on or off.
Always make sure the RESET button is engaged for correction operation
The power supply cord must be replaced if it fails to reset when either the TEST button is pushed, or it cannot be
reset. A new one can be obtained from Soleus Air Powered by Gree.
If the power supply cord is damaged, it CANNOT be repaired. It MUST be replaced with one obtained from Soleus
Air Powered by Gree.
OPERATION OF CURRENT DEVICE
DISCLAIMER
ALL INFORMATION AND THE TECHNICAL SPECIFICATIONS PRESENTED IN THIS USER’S MANUAL ARE THE
PRESENTATION OF THE MANUFACTURER. SOLEUS INTERNATIONAL HAS NOT CONDUCTED INDEPENDENT
TEST TO THE INFORMATION AND THE SPECIFICATIONS PRESENTED HEREWITHIN.
IMPORTANT SAFETY INSTRUCTIONS