Filter
Top Products
17
Reverse sewing
Reverse sewing is used for locking the end of seams and where
reinforcement is needed. At the end of seam, press down the
reverse sewing lever and touch the foot control lightly. Sew a few
reverse stitches. Release lever and the machine will sew forwards
again (A/1).
Changing sewing directions
1. Stop the machine at the point where you wish to change
directions with the needle still in the fabric.
2. Raise the presser foot and turn the fabric to line up its new
direction using the needle as a turning point. (2)
3. Lower the presser foot and start sewing in the new direction.
Removing your work
Turn the handwheel towards you to bring the thread take up lever to
its highest position. Raise the presser foot and draw the fabric away
from you. (3)
Cutting the thread
Hold the threads behind the presser foot with both hands, guide
them to the slit (B) and press down. (4)