Filter
Top Products
VI
CTORY
II V
HS MODELS
Figure 1. Location and identification of parts
DO NOT use this boiler if any part has been
underwater. Immediately call a qualified serv-
ice technician to inspect the boiler and to
replace any part of the control system and
any gas control which has been underwater.
WARNING
Should overheating occur or the gas
suppl
y fail to shut off, DO NOT turn off
or disconnect the electric supply to the
circulator pump. Instead, shut off the
gas supply at a location EXTERNAL to
the appliance.
WARNING
SLANT/FIN DOES NOT PERMIT THE USE OF VENT
DAMPERS ON VICTORY
II SERIES BOILERS.
OTHER DAMPERS OR DEVICES WITH SIMILAR
PURPOSE ARE NO
T PERMITTED.
WELCOME TO OUR VALUED CUSTOMER
You are now the owner of a Slant/Fin Victory II
gas-fired boiler, another quality heating product
designed and manufactured by an industry leader,
to provide your family with many years of reliable
comfort and trouble-free performance.
The care and maintenance of your new boiler is
important to prevent a hazardous condition which
might result from lack of proper servicing.
Therefore, you should perform regular “owner”
inspections as described in this manual (and report
any concerns to a qualified service technician) as
well as have your boiler serviced by a qualified
service technician at least once a year, preferably
before the beginning of each heating season.
LIGHTING INSTRUCTIONS
Locate, read and then follow the procedures on the
lighting instructions label attached to the boiler. For
reference, we have reproduced those instructions
in this manual.
Keep the boiler area clean and free of all materials that can burn.
NEVER close or reduce openings that supply air for the boiler fire and for ventilation.
2
Blower assembly
Air flow proving switch
Inducer relay
Circulator
Condensation trap
Pressure relief valve
Aquastat
Adapter and condensation drain
Ignition control
Junction box
Gas valve