Filter
Top Products
18
PUTTING RECEIVER INTO PROGRAMMING MODE
PUTTING RECEIVER INTO PROGRAMMING MODE
Mini Screw-In Dimmer
Model: LS-318
Start with dimmer off. Position the slide switch
to the desired operating mode. Power on
(by turning on the light switch or the circuit
breaker). The LED will ash quickly for Regular
On/Off mode, slowly for Flashing Alert mode or
will be solid for Countdown Timer mode. LS-
318 is now in programming mode and will stay
that way for 15 seconds.
On/Off & Dimming Control
Model: MD-318
Start with dimmer off; Power on the dimmer
(by turning on light switch or the circuit
breaker), you will hear a beep from the MD-
318 indicating unit is now in programming
mode and will stay that way for 15 seconds.
Mini Screw-In Dimmer
Model: LX-318
Start with dimmer off. Power on the unit
by turning on the light switch or the circuit
breaker. You will hear a beep. LX is now in
programming mode and will stay that way for
15 seconds.
On/Off Control
Model: MR-318
Start with unit powered off. Power on the unit
by turning on the light switch or the circuit
breaker. Your will hear a beep from the
On/Off control which indicates the unit is in
programming mode and will stay that way for
15 seconds.
Indoor/Outdoor Plug-In On/Off Control
Model: PA-318
On-Off/Countdown Timer Mode:
Start with the load turned off. Press and hold
the ‘SET’ button; Red LED will ash quickly
(release for On/Off mode) and then it will stay
on solid (release for Countdown Timer mode)
Wireless Wall Switch
Model: WE-318/WR-318
On-Off/Countdown
Timer/ Flashing Alert Mode:
Start with the load turned on. Press and hold
‘SET’ button; Blue LED’s will ash quickly
(release for On/Off mode), then slowly
(release for Flashing Alert mode- only the
WR-001 has this feature) and then it will be
solid (release for Countdown Timer mode).
Plug-In Dimmers
Model: PL-318/PR-318
(repeater)
PR-318S (repeater for security)
On-Off/Countdown
Timer/ Flashing Alert Mode:
Start with the load turned off. Press and
hold ‘SET’ button; Red LED will ash quickly
(release for On/Off mode), then slowly (release
for Flashing Alert mode) and then it will be
solid (release for Countdown Timer mode).
Garage Door Smart Button
Model: GB-318
Press and hold the black learn button (right
side of the unit) for approx. 3 seconds. The
LED light will start to blink faster. Immediately
let go and transmit the learn code from your
transmitter