Filter
Top Products
10
SETUP APP2.4 DEVICE SETTINGS
2.4 SETUP APP
6. Tap on the Button you created
7. Put your skylink receiver into
programming mode and Tap on “Learn”
4. Enter Your Device Name and
Tap on “Return”
5. Select either ON/OFF or
No-Dim/Dim and tap on “Add”
1. Tap on
“Device Settings”
2. Tap on
your zone
3. Tap on one of the
“Unused” buttons
Device Name:
eg. Bed Light,
eg. Table Lamp
After Programmed,
Tap on “Home”
To set your skylink
receiver into
programming
mode please refer
to page 18 of
this guide.