6
Tilt out the distribution tray and evaporator
pad assembly.
3.
Wash all plastic and metal parts (except electrical parts and compo-
nents) in humidier cleaner or a 50 percent solution of vinegar and
water.
If cleaning is not sufcient, replace the evaporator pad. (See
Replacement Parts and Service, page 7.)
IMPORTANT:
The evaporator pad should be replaced at least once a year
(i.e., once each humidication season). In cases of excessive
mineral buildup, more frequent media replacement may be
necessary if cleaning is not effective.
4.
5.
•
The Humidie also contains a one-
piece wick, which must be changed
along with the evaporator pad. The
wick can be changed easily by lifting out
the old one and replacing it with the new
wick provided with the evaporator pad.
•
Wipe any loose sediment from the water tray. Make sure no particles
are allowed to plug the drain hole.
IMPORTANT: At the end of each humidication season, tun
the water supply off and clean the unit.
If, after cleaning or replacing the pad, your FlowThru Humidier
does not perform up to previous standards, contact your HVAC
contractor for service.
6.