Filter
Top Products
5
Recommended Humidistat Settings
Outside
Temperature
Recommended
Setting
Outside
Temperature
Recommended
Setting
-20ºF (-29ºC)
15
(Low)
10ºF (-12ºC)
30
(Medium)
-10ºF (-23ºC)
20
(Medium-Low)
20ºF (-7ºC)
35
(Medium-High)
0ºF (-18ºC)
25
(Low-Medium)
Above 20ºF
(-07ºC)
40
(High)
Maintenance Instructions
How Water Hardness Affects Maintenance
Your humidier will accumulate minerals such as calcium and lime
after operating for a short period. (Accumulation of minerals is a sure
sign the humidier is producing humidity.) The amount of accumulation
depends on the hardness of the water supply in your area. Therefore,
the amount of time between cleanings is unpredictable.
To determine if your humidier pad needs cleaned or replaced, look to
see if the openings in the pad are caked with minerals.
CAUTION: Excessive buildup of minerals is detrimental to the
humidie’s intenal pats as well as to the evapoative pocess.
Refer to the maintenance instructions below to achieve years of efcient
performance from your Skuttle FlowThru Humidier.
Pad Cleaning and Replacement
WARNING: To avoid hazard of electrical shock or burn, turn off
power supplying this equipment before servicing.
Shut off the water supply.1.
Remove the humidier cover by turning
the screw (located at the bottom of the
cover) counterclockwise () and pulling
the cover out toward you.
2.