Filter
Top Products
TS+ TS380+
Table of Contents Previous Page | Next Page
7
TRIAL SEWING continued...
• Plug in adaptor and foot switch.
(If not already plugged in)
Note: Internal threading light turns
off when foot switch is plug-
ged into machine.
• Press foot switch to continue sewing fabric
(under presser foot).
• Lightly guide fabric while sewing.
Note: Seam guide is preset for
proper width and sewing angle.
• When seam is complete, continue sewing,
lightly pulling fabric towards left rear corner
of machine chaining off and forming thread
tail.
• Cut thread tail between presser foot and
fabric.