Filter
Top Products
TS+ TS380+
Table of Contents Previous Page | Next Page
10
PREPARATION FOR THREADING
• Your machine comes threaded. If you wish to change thread, an easy method for threading
is tying on threads. (refer to page 5)
• If machine runs out of thread, it is necessary to rethread machine. (refer to page 6)
• Swing thread guide holder up to operating position. Remove front cover by lifting gently at
tab on right side.
• Connect AC adaptor (only) to turn on light for threading.
• For best sewing performance use proper spool cap.
How To Fix On The Sewing Machine Thread Spools
• Put the three threaded spools into the spool pins.
• Then slide the thread caps (large size) firmly against rim of spool to prevent thread tangling.
How To Fix On The Overlock
Machine Thread Spools
• Pull the left & right spool pins outwards to
proper position.
• Put the three threaded spools into the spool
pins.
• Then slide the thread caps (small size) firmly
into the center of spools to secure the spools.