Filter
Top Products
ShadoShado
ShadoShado
Shado
w and Cutww and Cutw
w and Cutww and Cutw
w and Cutw
oror
oror
or
k Appliquék Appliqué
k Appliquék Appliqué
k Appliqué
MacMac
MacMac
Mac
hine Preparation:hine Preparation:
hine Preparation:hine Preparation:
hine Preparation:
• Pattern: Blanket Stitch # 13 reversed for Shadow and
Zigzag for Cutwork
• Stitch Width: 2.0 or desired width
• Stitch Length: Preprogrammed for blanket, 0.5 to 1.5 for Zigzag
• Foot: Standard Zigzag or
optional optional
optional optional
optional Blindhem foot (part #010400)
SeSe
SeSe
Se
wing Instructions:wing Instructions:
wing Instructions:wing Instructions:
wing Instructions:
ShadoShado
ShadoShado
Shado
w appliquéw appliqué
w appliquéw appliqué
w appliqué is where a lightweight colored fabric is layered under a sheer or transparent
fabric. Position colored fabric larger than the design area on the underside of the transparent
fabric and secure it in place using a basting stitch or fabric glue. Using a marking pencil trace
placement of the appliqué on the right side of the transparent fabric. Stitch along design lines
using the blanket stitch so that when the needle swings to the right it sews on the design line
and when it swings to the left it sews within the design area. When design is complete, trim
excess colored appliqué fabric on the underside close to the stitching.
For
CutwCutw
CutwCutw
Cutw
oror
oror
or
k appliquék appliqué
k appliquék appliqué
k appliqué, 2 layers of sheer fabric are stitched together, and the top layer of fabric
is trimmed away from the right side to create a sheer opening. Position sheer fabric larger
than the design area on the underside of the transparent fabric and secure it in place using a
basting stitch or fabric glue. Using a marking pencil trace placement of the appliqué on the
right side of the top layer of sheer fabric. Stitch along design lines using a straight stitch.
When straight stitching is completed, trim the top layer of fabric close to the stitching within
the design area.
Once trimming is completed, set machine to Zigzag stitch and sew along design lines so that
when the needle swings to the right it sews on the design line and when it swings to the left it
sews within the design area. When design is complete, trim excess appliqué fabric on the
underside close to the stitching. To pivot for curves or corners, leave needle down in fabric on
outside edge of appliqué, lift foot and pivot.
Shado Shado
Shado Shado
Shado
ww
ww
w
Cutw Cutw
Cutw Cutw
Cutw
oror
oror
or
kk
kk
k
1313
1313
13