Filter
Top Products
DecorativDecorativ
DecorativDecorativ
Decorativ
e Fe F
e Fe F
e F
unctionsunctions
unctionsunctions
unctions
Satin SSatin S
Satin SSatin S
Satin S
titctitc
titctitc
titc
h Appliqué &h Appliqué &
h Appliqué &h Appliqué &
h Appliqué &
BlindstitcBlindstitc
BlindstitcBlindstitc
Blindstitc
h Appliquéh Appliqué
h Appliquéh Appliqué
h Appliqué
• Pattern: Zigzag or Blindhem
• Stitch Width: 1.5 (1/16 of an inch)
• Stitch Length: 0.5 – 1.5 for Zigzag,
2 – 3 for Blindhem
• Foot: Standard Zigzag or
optional optional
optional optional
optional Blindhem foot (part #010400)
SeSe
SeSe
Se
wing Instructions:wing Instructions:
wing Instructions:wing Instructions:
wing Instructions:
Position appliqué piece on background fabric and
secure it in place using fabric glue. Align needle
so that it pierces background fabric along the
outside edge of the appliqué. Lower presser foot.
For
Satin SSatin S
Satin SSatin S
Satin S
titctitc
titctitc
titc
h Appliquéh Appliqué
h Appliquéh Appliqué
h Appliqué, use Zigzag stitch and
proceed to sew following the edge of the
appliqué.
For
BlindstitcBlindstitc
BlindstitcBlindstitc
Blindstitc
h Appliqué h Appliqué
h Appliqué h Appliqué
h Appliqué use Blindhem stitch and
proceed to sew following the edge of your
appliqué.
If using a Blindhem foot, align the lip of the blind
hem foot guide so that it sits directly under the
edge of the appliqué. You may need to adjust the
position of the guide to bring it closer or further
from the edge of the appliqué, by using the
thumbscrew located at the right of the foot.
To pivot for curves or corners, leave needle down
in fabric on outside edge of appliqué, lift foot and
pivot.
Satin SSatin S
Satin SSatin S
Satin S
titctitc
titctitc
titc
hh
hh
h
Blindstitc Blindstitc
Blindstitc Blindstitc
Blindstitc
hh
hh
h
1212
1212
12