Filter
Top Products
17
Before starting your project always test the
compatibility of thread, needle and fabric together.
Also test stitch length and pressure foot pressure.
Step
z
Turn the stitch length adjustment dial
q
to
adjust the stitch length to 3. Raise the thread
take up lever and slide the needle and bobbin
threads under the presser foot.
Step
x
Turn the handwheel
w
toward you to lower the
needle into the fabric.
Step
c
Lower the presser foot lifter
e
.
Set the speed control slider to a slower setting
until you get used to the sewing speed.
Press the foot control
r
to start sewing.
z
x
c
v
b
Thread take-up
lever
Test Stitching
w
e
r
t
y
u
q
HOW TO SEW
Step
v
Check the sewing result and adjust the needle
thread tension
t
as necessary.
Step
b
Press the auto thread cutter button
y
to trim
the threads. You can continue sewing without
pulling the bobbin thread up again through the
needle plate.
* Do not use the thread cutter
u
if the thread is
heavier than #30.