Filter
Top Products
Class 99 & 99K
To Start Sewing
Be sure to have thread take-up lever 5,
Fig. 14 at its highest position.
Place the material beneath the presser
foot Q, Fig. 23, then turn the had wheel
to bring the point of the needle into the
material, then lower the presser foot by
means of presser bar lifter R and start
to sew.
Some materials, such as soft finished
sheers, nylons, jerseys, tricots and
other elastic and sponge textiles,
require a slight amount of assistance in
feeding during sewing operations.
Fig. 23 To Start Sewing
However, too much pull will stretch the seam, create irregular stitching and bend
the needle. Most materials require only guiding for best sewing results.
The machine will sew its own thread when sewing from one piece of material to
another. However, it is not recommended that any sewing be done with a
threaded machine unless some fabric is under the presser foot.
Page 19
Table of Contents | Previous Page | Next Page