Filter
Top Products
Class 99 & 99K
To oil the parts underneath the bed of the machine, turn the machine back on its
hinges and apply oil to the oil holes and bearings indicated in
Fig. 12.
To oil the stand, apply a drop of oil to the centers upon which the band wheel and
treadle work, and to both ends of the pitman rod connecting the treadle with the
band wheel.
After oiling, run the machine rapidly for a few minutes so that the oil may reach
the bearings. Neglect to oil the machine will shorten its life and cause you
trouble and annoyance.
Always use SINGER oil. Inferior oil clogs the bearings, prevents efficient
working, and causes rapid wear of the mechanism.
Page 10
Table of Contents | Previous Page | Next Page