Filter
Top Products
27
HOW TO TAKE CARE OF THE MACHINE
CLEAN
AND
OIL
To Clean the Machine
When in regular use
Machine should be cleaned periodically
with lint brush to remove lint and fluff which
may have accumulated around workirig parts.
To clean bobbin case area, removebobbin
case as instructed on page 29. Oil machine
after each cleaning as instructed on pages 30,
31 and 32.
CLEAN
BETWEEN
TENSION
DISCS
CLEAN
When stored
If machine is to be stored away for an
indefinite period, a thorough brush-cleaning
to remove all traces of lint and fluff, followed
by swabbing of all exposed parts with a lint
-_._ free brush saturated with SINGER* oil is
....."_'_,..""' CLEAN necessary to protect machine against rust
AND damage.
OIL
-_"_:_ * A Trademark of THE SINGER COMPANY