Filter
Top Products
24
DARNING
With just a little practice you will be able
to darn clothing and household linens effort-
lessly and quickly.
I •
Set Stitch Width Selector on O setting and
adjust Stitch Length Lever for desired
stitch length (usually about 10 or 12).
2. Decrease pressure by turning Pressure
Regulator thumb screw to right. Pressure
should be lighter than for normal sewing
but not too light to prevent work from
feeding smoothly.
5. Lower presser foot and start stitching,
alternately letting fabric feed normally
away from you and then gently pulling
fabric toward you. Continue this forward
and backward motion until area to be
darned is filled with parallel lines of
stitching.
6. For additional strength, turn fabric and
cover area with crosswise lines of stitching•
3. If area to be darned is open, baste an
underlay in place.
4. Place area to be darned under presser foot.