Singer 1408 Sewing Machine User Manual


 
37
Free Motion Darning, Stippling
* The darning/ embroidery foot is an optional accessory not
included with your machine. (1)
Install the darning plate. (2)
darning/ embroidery foot
darning/ embroidery foot
For darning, first sew around the edge of the hole (to secure
the threads). (5)
Free motion darning is accomplished without the sewing
machine internal feed system. Movement of the fabric is
controlled by the operator. It is necessary to coordinate
sewing speed and movement of fabric.
Using the optional darning/
embroidery foot will help guide you as you sew, in a
meandering fashion to create small curving lines to hold
layers of fabric and batting together.
Darning:
Remove the presser foot shank. (3)
Attach the to the presser foot bar.
The lever (a) should be behind the needle clamp screw (b).
Press the on firmly from behind with
your index finger and tighten the screw (c). (4)
First row: Always work from left to right. Turn work by 90° and
sew over previous stitching. A darning hoop is recommended
for easier sewing and better results.
Note:
Stippling:
Set the machine for straight stitch.
1 2
3
a
b
c
5
4
Model 1408 Model 1409
EN