Filter
Top Products
3
3.1 Introduction
This operating manual should be used to get the most benefit from your 390
Surface Prep machine. Following these instructions will both extend the life of
your machine and reduce repair costs.
Please make sure you are fully familiar with the operating instructions before
using this machine.
3.2 Danger while working with the machine
The 390 Surface Prep is designed to the highest technical standards.
Incorrect use can be dangerous!
Use this machine only
- As instructed in this operating manual
- With the machine in perfect working order
Disturbances that could impair safety have to be eliminated at once.
3.3 Restriction of use
The 390 Surface Prep Machine is exclusively for wet cleaning and polishing of
resilient and textile floor coverings and for grinding pavement and leveling
compounds in dry environments. It should not be held responsible for any damage
or loss caused by incorrect use.
- To take care of all directions from the operating
- Manual and the execution of maintenance and services
3.4 Genuine Spare Parts
Spare parts and accessories are manufactured uniquely for the 390 Surface Prep
Machine. It must be emphasized that parts obtained from unauthorized sources
must not be used.
Sinclair Equipment Company cannot be held responsible for the performance of
or any damage arising from the use of machines in which genuine spare parts
have not been used.
This is particularly important with mounting discs, disc and brushes.