Filter
Top Products
14
MAIntenAnCe AnD CARe
Replacing the Vacuum Bag
NOTE: Unplug the vacuum cleaner from the
electrical outlet before changing the bag.
• To access the vacuum bag lift the bag
compartment latch.
• Remove the used vacuum bag by pulling
the yellow bag collar tab away from the
vacuum (Fig. 1). Slide the used bag out of
the holder which automatically seals the bag
(Fig. 2). Discard the used bag.
• To install a new bag, slide the bottom of the
yellow bag collar into the bag holder until it
“snaps” into place (Fig. 3).
• Push the top of the bag collar upward until
the bag holder “snaps” into place on the
vacuum (Fig. 4).
• Tuck the bag corners into the bag
compartment before replacing the bag
compartment cover.
• Replace the cover and press down on
the bag compartment latch to secure it
into place.
Fig. 1
Fig. 2
Fig. 3
Fig. 4