Filter
Top Products
22
Handling and operation
KH 2600
GB
IE
Setting the wake tone
Press the ►►I button ¡
11
or the I◄◄ button
13
repeatedly to select a wake tone:
→ → → → → → →
delete. (For an explanation of the symbols see
chapter Display.)
Press the ¡
button to activate, in addition, the
wake-up light function.
NOTICE
Set the volume that you want to be woken with as described in the chapter ►
Setting the volume.
Set the light intensity that y
ou want to be woken with as described in the ►
chapter Reading lamp.
The w
ake-up light function can only be activated together with a wake ►
tone. The light intensity increases in the 30 minutes before the set wake
time and the
symbol blinks in the display
4
.
To be woken with the wake-up light only the volume must be set to 00. ►
Press the ALARM1/DOWN button ¡
18
/ALARM2/UP button
16
on the
device or the AL1/AL2 button on the remote control again to confi rm the
setting or wait approx. 7 seconds and the alarm will be confi rmed automati-
cally.
The symbol for the selected wake tone blinks in the display and the alarm goes
off via the speaker with the arrival of the wake time.
NOTICE
If you want to use music from your iPod/iPhone as the wake tone select a ►
title on the iPod/iPhone (or an album and/or playback list) that is to be
used as a wak
e tone. Your choice will be played back when the set wake
time arrives.